| Subject | Text |
| Problem Solved | w w w. p4c.philips.com/files/2/21ce1550/21ce1550_dfu_eng.pdf
The manual for the specified TV can |
| tortuous tv trouble solved, read for solution | after screwing around with it forever,,, it turns out that the problem was almost definatley COLD JO |
|
|
| i solved for y | i was have the same problem
there is 2diod & resistanc all(smd)burnd near the control ic
i don |
| problem solved! | A friend of mine borrowed me a HDD. After mounting it, I noticed the problem couldnt be a faulty HDD |
| Solved! | Replaced C176 and everything came back in order!! |
| SOLVED! | Yes... old post. But for posterity's sake, here's how i fixed mine....
Preface: see page 12 of th |
| issue solved | for those who need info on this display ,i have pdf of connections and specs. |
| [SOLVED] LCD samsung LE40A656 - no picture, no osd | Hi, i have an lcd tv samsung LE40A656 with the following fault:
tv turns on ok, but no picture, n |
| spanish tv in uk | Please can somebody help me?
I have recently moved to the UK and brought a belgian and a spanish |
| I think your TXT and OSD are OK.
Check/replace these components in the ABL-line, 2x SMD-zenerdiod |
| Gary, thanks a lot. The problem was solved.
Actually, the trimmer on this chassis is CT332.
:D : |
| The major problem is the mains voltage, 230 V in Europe as related to 110-120 V in the US. This prob |
| hello again.
mystery solved... i guess.. works atleast on my s7500 monitor
NOTE: My monitorcable |
| Hi I read your problem. I think you must be checking your smps for authorize service station and the |
| when can't the unleaded soldering of Sn- Zn be used? | "The developing item about the sealing and packing technique by unleaded soldering at low tempe |
| Problem with Grundig T51-640 TV | Hello everybody! I have a big problem with my Grundig T51-640 TV.It1 s pretty old indeed but i still |
| ivtec | [quote:69a817eef2="minnie"]New wireless router or different anti-virus.[/quote:69a817eef2]
Than |
|
|
| try this!!!! | Hello zlix, once that problem happend to me to!!
I solved changig both condensers CV14 and CV15 tha |
| 11AK19PRO Dead - LED is dead and it sounds intermitently | Hi
I need some help with a TV which has a 11AK19PRO Chassis.
First I had problems with Narrow pi |
| yes, I solved the problem. it is necessary to decode the IDC A09 according the procedure indicated i |
| Thanks for your help, i solved the problem by I'm not sure what the cure was but i made recovery hd, |
| National Tc 2186 | I had this problem a week ago and solved the problem by sweep soldering because i found quite a lot |
| Bose Lifestyle 48 problem | Hi all
I am facing this problem of "Format Unsupported" in my Lifestyle 48 (Series II) |
| I have exactly the same problem with this tv. I bought it approx. 2 years ago. Just after I bought i |
| Thanks for the help | I had the same problem so I contacted a local speaker repair shop. To say that they were less than |
| Grundig | Problem solved: TDA 8410 .
:lol: |
| width problem solution | samsung 56v width problem can be solved ...
just replace the boosing capcitor (pf) 222/1600v to p |
| Hi,
I've replaced the HOT and the problem is solved... let's hope it stays that way...
My gue |
| iiyama vision master pro 510 blank screen after reboot | I also have the same problem as described.
My, already 5 years old, iiyama Vision Master Pro 510 |
| Finlux 2571 NHEM Problem | Dear
We faced major problem in Finlux 2571NHEM ( this TV used as interactive TV for otrum Global) |